[Quick Answer]: How far from the wall should a toilet be?

The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.

How far from the wall should a toilet flange be?

The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.

What is the rough-in distance for a toilet?

The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.

How do you close a toilet to the wall?

Install the Offset Flange

  1. Positions the offset flange so that the bent end moves the flange opening closer to the wall. …
  2. Make sure the back of the offset flange connects snugly with the drainage pipe. …
  3. Check to make sure that the flange’s opening is sitting flush and even against the bathroom floor.

How do I know if my toilet is a 10 or 12 rough?

If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.

Can you replace a 10-inch rough in toilet with a 12-inch rough in toilet?

The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.

Can you replace a 14-inch rough in toilet with a 12-inch rough in toilet?

You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.

What is rough in?

: to make a rough or unfinished version of (something, such as a design) as the first step in creating the finished version Rough in the lettering on your poster.

Does a toilet have to be against a wall?

Toilets should have a minimum of 15 inches from walls that flank the fixture. A distance of 12 to 12.5 inches should be between the center of the toilet flange and the back wall.

How far can you move a toilet from the stack?

If your waste line has a diameter of 3 inches, you can place the toilet within six feet of your stack. The toilet can also be as far as 10 feet from your stack, if the diameter of the waste line is 4 inches.

Can you move a toilet away from the wall?

Moving the toilet is not a change to be taken lightly. But if needed, it can be accomplished with substantial plumbing work and a great deal of peripheral work, such as opening up a floor or ceiling, rerouting pipes and drain flange, and re-installing the toilet and other fixtures.

Can a toilet be more than 12 inches from the wall?

It won’t affect how the toilet itself operates. However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.

Are all toilets the same distance from the wall?

The plumber determines the actual distance when he sets the toilet flange in the floor. … The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.

Why would I want an elongated toilet bowl?

Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

Is a 12 rough in standard for a toilet?

Toilet Rough In Dimensions: A toilet’s rough-in measurement is the space between the wall behind the toilet and the center of the waste pipe. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.

What does 10-inch rough in toilet mean?

When you wonder about ‘what a 10-inch rough-in toilet means’, it refers to the finished wall and the floor flange opening center distance of about 10-inches. 10-inch rough-in is usually found in the old models’ homes. Although, there are only fewer toilets options available.

What is an offset flange?

Unlike a standard flange, which is centered on the waste pipe, an offset flange is off-center—that lets you shift the location of the toilet by a couple of inches (left, right, forward or back).

How many inches does an offset toilet flange move?

The typical offset is 12-inches for most residential toilets. As a result, the toilet had 4-inches behind the tank. It looked like it was trying to participate in the activities of the bathroom rather than sit quietly until needed.

What is the difference between a 12 and 14 rough-in toilet?

The main difference between 12-inch rough-ins and 14-inch rough-ins is in their size (proportions). Depending on the type of bathroom, 12-inch rough-ins are generally more used than 14-inch rough-ins, but they both have merits, which means that you sometimes need to reduce the space from behind the tank.

What are fit offs?

The fit-off is the usually final stage for your plumbing and gas service on your renovation or new build . This is when we install all of your gas appliance such as gas stove, oven, hot water system, and install fixtures such as gas Bayonet for a bbq point.

How long does it take to rough in a bathroom?

They should also review placement of water lines, drains, nailplates, and toilet flanges. The HVAC contractor should have taken care of pressure testing and final inspections after the rough-in is completed. Plumbing rough-in should take between 3 – 5 days, barring any problems.

What is a plumbing stub out?

The plumbing stub-outs are the end result of the rough-in phase of plumbing a residential or commercial building. They are usually installed while the walls are still uncovered, and after the drywall work and painting is complete, a plumber comes back and hooks them up to the plumbing fixtures.

What do you do with the space behind the toilet?

Filling The Empty Space Behind The Toilet

  1. Hang towels. …
  2. Install hooks for baskets. …
  3. Mount an open shelf. …
  4. Mount multiple shelves. …
  5. Mount baskets. …
  6. Mount a storage unit. …
  7. Create built-in shelving. …
  8. Add a storage tower.

How do I fill the gap between my toilet and floor?

Apply a thin, even bead of caulk around the base of the toilet to cover the gap along the floor and hide the shims. If necessary, smooth the caulk with your finger, wiping your finger clean frequently with a paper towel or a rag.

Is it expensive to relocate a toilet?

The cost to move a toilet or sinks can be $2,500-$3,500 per fixture. Plumbing can be a significant cost factor in a remodel when a bathroom floor plan is altered. The toilet is the most expensive to move. Connecting the toilet to the existing sewer line can be a bit tricky for your plumber.

Where should a toilet be placed in a bathroom?

The best direction of the toilet seat, according to Vastu, is in the south-east or north-west side. This should be in such a way that a person using it is not facing either the east or the west. 5. Windows should open out along the east, north or west in your bathroom.

How many toilets can you put on a 4 inch line?

4″ waste line can support 90 DFU’s, Toilets can be 3–4 DFU’s depending on how many gallons per flush. So, 22 toilets if they use a lot of water.

Can you put a toilet on an internal wall?

On a serious note, it is absolutely possible to install a toilet, even a bathroom as a matter of fact, anywhere in your house. In the past, many homeowners have had the idea of their dream bathroom crushed because the location was simply too far away from the main drain.

Can you switch a toilet and sink?

Ultimately, you can move your sink, tub, and toilet in a bathroom renovation, but doing so will require a reworking of your plumbing and electrical systems, and that will be an added cost to the project. That cost comes on top of the expenses of demolition, installing flooring, putting up drywall, and so on.

Can you turn a toilet 90 degrees?

Can You Rotate A Toilet? – Bathroom Remodeling – YouTube

Does toilet rough in need to be exact?

A 12 inch rough in is the most common measurement in bathrooms. This size allows for the most variety in the shape of the bowl and style of the toilet you purchase. Even though this is the most standard measurement, don?t forgo measuring (at least twice) before buying a new toilet.

How do you measure toilet depth?

To measure the depth of your current toilet, measure from the front edge of the toilet bowl to the back of the tank. If you are comfortable with your current toilet’s depth, then select a new toilet with a similar depth.

How far away should the toilet be from the vanity?

Toilet placement

A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″.

Where should a toilet flange be placed?

The more popular option for closet flange installation is setting it above the floor, which means the underside of the flange is placed higher than the finished floor. When installing a closet flange above the floor, it’s recommended to install the flange a quarter inch above the finished floor.

How much space do you need for a toilet UK?

Minimum sanitaryware sizes

The toilet and bidets must have a minimum space of 70cm in width and 120cm in length. If they are next to a wall, the minimum free space should be 20cm, and if there is an element on their side, they should not be placed less than 15cm away for greater usability.

What is the best height for a toilet?

Toilet Height

Standard-height rims are 14- to 15-inches from the floor and should work well for shorter people. If you’re taller, consider chair height toilets that have a toilet seat height of 17-inches or more.

Is a one piece toilet better than 2?

One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.

Do Round toilets flush better than elongated?

If the toilet uses a flush that circulates the water in the bowl using force, the elongated shape of the toilet may provide slightly better pressure. However, in other types of flush technology, there is no difference between the two.

Should toilet flange be flush with floor?

For those that don’t already know, the proper toilet flange height is when it’s flush with the top of the finished floor. … Third, you can take off the flange as well as the toilet and trim down the waste pipe that comes up through your bathroom floor. This opening of this pipe should be level and flush with the floor.

Do toilets have different depths?

Toilets have many standard measurements, including height, width and depth or length. The width is 15 inches, height is just over 18 inches and the depth is 18.9 inches.