What is a semi underground pool?

A semi inground pool is exactly what it sounds like: a swimming pool that is partially installed in the ground and partially installed above ground. Usually, most of the pool is still inground, but part of the pool will be raised a few feet or more.

What is the benefit of a semi inground pool?

Semi-Inground Pool Benefits: Fully insulated wall allows for full bury &amp, will keep pool water warmer longer. Freeform shapes available to give a more custom feel and will tend to allow for ‘challenging’ (long and skinny) backyards. Can be installed as full inground at a lower price than traditional inground pools.

How deep can a semi inground pool go?

Typical INGROUND POOLS have a 3′ shallow end then slope down to 8′. SEMI-INGROUND pools are typically flat bottom pools and have a constant depth of either 42″ of water or 48″ of water, depending on the depth of the pool wall panel.

What is a semi inground pool made of?

These pools are typically made with a steel or aluminum wall rather than the vinyl, concrete, or fiberglass material like semi inground pools.

Can semi inground pools be salt water?

Depending on the manufacturer, some semi inground pools can be saltwater. Due to the steel used in some, like the Stealth Pool, you cannot use salt water. Salt chlorine generators installed in Stealth Pools will void any manufacturers warranty due to its highly corrosive nature.

Are semi inground pools worth it?

Semi-inground pools offer the best of both worlds. You’ll find that a semi-ground swimming pool is significantly deeper than a regular above-ground pool, but doesn’t cost nearly as much as a traditional in-ground pool.

What is a cocktail pool?

Cocktail pools tend to be less than 400 square feet and provide an ideal solution for homeowners with limited outdoor spaces. Sometimes called “spools” for a small pool that combines a pool and a spa, these cocktail pools often include heaters, jets, and benches.

What is the difference between above ground and semi inground pool?

A semi inground pool may be only slightly or almost completely above ground while an inground pool is pretty much always installed entirely submerged in the ground. An above ground pool, on the other hand, is constructed or installed 100% above ground.

How do you install a semi above ground pool?

Installing a DIY Semi In Ground Pool | The Pool Factory – YouTube

How deep is a stealth semi inground pool?

The Stealth Semi-Inground can be buried up to 3/4 in the ground to create a sleek design in your backyard. You can surround it with a wood deck, or any landscaping material of your choice! Because the Stealth pools are so customizable, we ask that you please fill out the form below to get your personalized quote!

Can you backfill a semi inground pool?

A semi inground pool is an above ground pool that can be put partially in the ground. They are sturdier than standard above ground pools so that they can withstand the pressure from backfill or dirt against the pool wall.

Can I partially bury an above ground pool?

The walls of an above ground pool typically consist of a thin aluminum wall that holds the pool liner. … You will generally find above ground pool retailers willing to partially bury an above ground pool, but you can expect to leave at least half of the pool out of the ground.

How much does a stealth semi inground pool cost?

Exclusively at Pool and Spa Depot, the Stealth Semi-Inground Pool is the world’s most versatile pool. And it starts at just $7,999. That includes installation!

What is a hybrid pool?

A hybrid pool utilizes both vinyl liner elements and gunite elements for a truly spectacular pool experience. Customers get to enjoy the benefits of vinyl without the limitations, and the benefits of gunite without the drawbacks.

How do you install a semi-inground pool?

Semi InGround Radiant Pool Install | #PoolGuys – YouTube

Are saltwater pools better?

Lower chlorine levels make saltwater pools gentler on skin and eyes. … Chlorine levels in saltwater pools are enough to disinfect, but not enough to fade expensive swimwear and gear. Because of the natural chlorine, saltwater pools require fewer chemicals (and less attention) compared to chlorinated pools.

Which above ground pools are best?

Here, the best above-ground pools on the market.

  • Best Overall: Intex Ultra XTR Rectangular Pool Set at Amazon. …
  • Runner-Up, Best Overall: Intex Ultra XTR Pool Set with Sand Filter Pump at Amazon. …
  • Best Saltwater: Intex Ultra XTR Pool Set with Saltwater System at Amazon. …
  • Best with Steel Frame: …
  • Best Inflatable: …
  • Best for Kids:

What is the average cost of a cocktail pool?

The average professional cocktail pool installation costs around $5,000 and can range anywhere from $3,500-$7,000 depending on the size, style and accessories that are included. It’s important for homeowners that have a higher budget to choose a contractor who offers cocktail pools in their services.

Are spools cheaper than pools?

More often than not, a spool will cost less than a full sized in-ground pool and more than a conventional spa. The price to install will also be much less than if you installed a pool/spa combination. When considering the costs of a spool, you’ll also want to factor in how you plan to use it.

What is the difference between a spool and a cocktail pool?

The shorter answer is: it’s really just a small pool. “Spool” is a newer term used for cocktail pools with more traditional spa features, but in many cases, the two terms are essentially interchangeable. … Cocktail pools can have heated jets (making them more like spas or hot tubs). They can have bench seating.

What’s the deepest above ground pool?

The deepest above-ground pool available is the Intex 36-Foot by 16-Foot by 52-Inch Above-Ground Pool. The four-foot depth may not seem like a lot, but in the world of above-ground pools, it’s tough to find deeper floors.

What do I backfill a semi inground pool with?

The simplest way to backfill a pool is to put the dirt that was excavated back into the hole it came out of. This is also the least expensive option, since removing excavated dirt and trucking in more is costly. A slurry mix also makes a good backfill. A slurry mix is made using portland cement and plaster sand.

How do you prepare the ground for a semi inground pool?

Stealth Semi-In Ground Pool Installation – YouTube

How can I make my semi inground pool look nice?

Ideas and Options

  1. Wrap a Deck Around It. Some people refer to semi inground pools as deck pools because they’re so often installed with an attached or wraparound deck. …
  2. Incorporate it into Your Yard’s Terrain. …
  3. Use Creative Landscaping to Dress it Up. …
  4. Make the Most of the Scenery.

What is an infinity pool?

: a pool (typically a swimming pool) with an edge over which water flows to give the appearance of the water extending to the horizon And most importantly, the pool and bar are open for business, where a spacious infinity pool looks down on Kalakaua Avenue and makes for the ideal spot to watch the sunset and sip a …

Can a stealth pool be salt water?


Made of Steel! Limited Lifetime Warranty! Chemical Resistant, Including Salt!

Can I install a radiant pool myself?

Installing a Radiant Pool can be a quick and easy DIY job as with the Metric Series Round pool or a custom inground building project.

How do you drain a semi-inground pool?

How to Drain an Inground Pool

  1. Rent or buy a submersible pump. …
  2. Monitor the Draining Process. …
  3. Turn Off and Remove the Submersible Pump. …
  4. Open a Hydrostatic Pressure Relief Valve. …
  5. Perform the Work You Drained the Pool For. …
  6. Replace the Hydrostatic Pressure Relief Valve. …
  7. Refill the Pool. …
  8. Turn on the Pool Pump.

What does it mean to backfill a pool?

Backfilling a pool is the process of filling the empty space left by the inground pool with gravel, sand, or dirt. Backfilling is just one part of the pool removal process. The concrete floor and walls of the pool must be broken up and/or removed prior to backfilling.

How much does it cost to backfill a pool?

Full vs. Partial Cost To Fill In A Pool

Fill Type Time (Days) Average Cost
Partial Removal (Small) 1 – 3 $2,000 – $7,000
Partial Removal (Large) 2 – 5 $2,500 – $10,000
Full Removal &amp, Backfill 3 – 7 $4,000 – $16,000

Can you backfill around an above ground pool?

During excavation, you’ll want to keep some of the excavated soil nearby so you can backfill around the pool once it’s complete. But don’t backfill until you’ve filled the pool with water. Most above-ground pools aren’t designed to withstand pressure from the outside.

Can I put an Intex pool in the ground?

Drop Intex Pool with a deck – YouTube

How long do above ground pools last?

The market average life of an above ground pool may be shorter than you think at about 7-15 years. However, when you buy from a quality brand and maintain your pool properly it will last many years longer than that.

How deep can radiant pools be?

Note: All Radiant pool styles are a depth of 52 inches deep.

What is a radiant inground pool?

The Radiant Semi-Inground Pool, gives you options on installation and finishing! You can add a full deck to this amazing pool using 5/4 wood receptor coping. With this option, you get a clean finished edge, creating a smooth transition from deck to pool.

Do natural swimming pools attract snakes?

Snakes and frogs may be attracted to natural pools, but typically won’t stay long, as there will be no reliable source of food for them in the pool, however, occasional hand skimming of the natural pool might be required for unwanted visitors!

What is a hybrid inground pool?

Semi-inground pools combine benefits of both above ground and inground swimming pools. They are aesthetically more pleasing than above ground pools as you can add features such as decking or pavers to create the appearance of an inground pool but still have a lower cost to build and maintain.

What is a resin pool?

Resin pools come in a wide variety of designs, colours, and styles. The term resin (or polymer) refers to the high strength plastic material that the pool’s frame is made of. … The pool also becomes much more resilient against drainage issues (as sitting water cannot rust the resin bottom rails and footplates).

What is a stealth semi-inground pool?

Stealth Semi-Inground Pools Are Durable

Stealth Semi-Inground Pools are made in the USA and constructed using chemical and UV-resistant steel They are impact resistant, are able to withstand high pressure, and come with a limited lifetime warranty.

How do you winterize a radiant pool?

A removal tool is sold at the retail store. and let the pool water drain down to bottom of skimmer. Leave hose connected to skimmer to allow any water to drain out-DO NOT PLUG! clockwise into the “winterize” position.

What are the disadvantages of salt water pools?

Cons of Salt Water Pool Systems

  • You will need to store and handle high amounts of salt.
  • Muriatic acid will need to be added to the pool water on a regular basis.
  • The pH levels will need to be continuously monitored.
  • Any issues with the generator or pool system may require help from a professional.

Can salt water pools raise your blood pressure?

Saltwater Pools Come With Health and Environmental Concerns

Providers have also linked higher heart mortality risks to sodium absorption through the skin, particularly among people with: High blood pressure.

Which is cheaper to maintain saltwater or chlorine pool?

A saltwater pool requires less than $100 a year in salt and chemicals if it is consistently maintained. A chlorine pool, on the other hand, will cost between $300 and $800 per year in maintenance chemicals. … These factors may mean that the cost savings for a saltwater system will be less dramatic.