Often asked: What is gator dust?

GATOR DUST BOND is a unique mixture of polymer binders and calibrated stone available in Sahara Beige, Stone Grey. Once GATOR DUST BOND sets, it becomes very firm and locks between the stone joints while still retaining flexibility and providing a long lasting, durable jointing material.

How long does Gator dust take to harden?

Gator Dust requires 24 hours on a conventional drainage base, it is not for use on overlays.

How much Gator dust do I need?

When installing Gator Dust, you must leave a ⅛” space below the top of the stone. By doing this, the surface of the stone will protect the joints. We do not recommend using regular sand to halfway fill the joints of a Gator Dust project.

How do you apply Gator dust?

How to install Gator Dust polymeric stone dust – YouTube

What colors does Gator dust come in?

Gator Dust comes available in two colors: Beige and Slate Grey.

How long will polymeric sand last?

Polymeric sand can last up to 10 years before replacement is necessary. However, certain manufacturers claim some products can last up to 15 years.

How do you get rid of Gator sand?

How To Remove Polymeric Sand From Pavers Right After The Installation

  1. To begin, avoid any contact with water or moisture before cleaning. …
  2. Sweep the surface with a broom with soft bristles. …
  3. Repeat step two as many times as necessary to remove as much polymeric sand as possible. …
  4. Use a leaf blower to blow off any leftover.

How much does a bag of gator dust cover?

One bag of 50 lbs (22.7 kg) of this product will cover between 20 to 30 square feet (1.86 to 2.79 sqare meter) if the joints are about 1” to 2” (2.54 to 5.08 cm) wide and the stones are about 2” to 2-1/2” (5.08 cm to 6.35 cm) thick.

What should I put between flagstone?

Rocks. Small stones, gravel, and crushed gravel are all commonly used as a flagstone filler. They are both a practical and aesthetically pleasing filler solution as they reduce weed growth and bug infestations.

What is polymeric sand?

Polymeric sand is a material used to fill paver joints, the empty spaces found between each paver, tile or natural stone. It is sometimes called jointing sand, paver sand or hardscape sand. Jointing sand is made up of fine grains, to which manufacturers add a mixture of specific additive particles.

What do you grout flagstone with?

Mix 3 parts sand to one part portland cement. Slowly add water until your mortar mixture reaches a pasty consistency, similar to peanut butter. Fill a grout bag with your sand and Portland cement mixture. Insert the nozzle of the grout bag into the gaps between your flagstones.

What is a flagstone patio?

Flagstone is a sedimentary stone that’s sliced into different pieces and layers. It is a popular design choice for patios and walkways in residential areas. Types of rock used for flagstone include sandstone, bluestone, slate, quartzite, and limestone.

How do you sweep polymeric sand?

How to use Polymeric Sand – YouTube

What is EnviroSAND?

EnviroSAND is a sand mixed with a powdered plant glue designed for the joints of paving stones. It’s designed to simply stay in place keeps it from washing out, keeps the weeds out.

Are all polymeric sands the same?

No. Not all polymers are the same. Some are stronger and some are weaker. The cost of the polymeric sand can indicated how good the glue is and its performance.

When should you not use polymeric sand?

#6 – Too Narrow or Too Wide Joints

The sand is simply pushed out of the joints. This is why we don’t recommend using polymeric sand on extremely narrow joints. Similarly, too-wide joints can lead to washout, because they allow too much water flow during the activation process.

What can I use instead of polymeric sand?

Builder’s sand is the most common replacement for polymeric sand, as it is easy to access and not expensive. It is used heavily in construction projects, hence its name. Because this sand is very coarse, you will need to use it regularly. You’ll have to reapply it for years as it settles.

Will water drain through polymeric sand?

Installing polymeric sand involves more than just sweeping and watering. … That is because this will harden and not allow water to drain through, keeping the water below the pavers and saturating the joints, not allowing the polymeric sand to properly dry and never set.

Will rain mess up polymeric sand?

Installing polymeric sand on a damp or wet surface could cause the sand and polymers to stick to the surface and become difficult to remove. After installation, a hard rain on polymeric sand that has not fully set up could result in polymeric sand all over the top of the pavers.

Does polymeric sand harden like concrete?

Polymeric sand cures by drying. And in order to fully set, it needs to dry out completely. If your polymeric sand didn’t harden up, it’s pretty much guaranteed there’s a moisture issue. If the joints remain wet after the installation, they will remain soft until they dry.

Can I use regular sand between pavers?

Can I Use Regular Sand Between Pavers. Yes, normal sand serves this purpose very well. Fill gaps between pavers and help lock the individual blocks in place, so they don’t shift. If possible, use irregular, sharp-grained sand, as they have sharp edges and bind together better.

Does vinegar remove polymeric sand haze?

If poly sand haze has transpired on the surface, it must be cleaned with an acid-based cleaner. Sometimes vinegar can be used unless the poly sand haze is severe.

What is super sand?

Dubbed “super sand”, it could become a low-cost way to purify water in the developing world. The technology involves coating grains of sand in an oxide of a widely available material called graphite – commonly used as lead in pencils.

How do you use Supersand?

How To Install Gator Supersand – YouTube

What is polymeric stone dust?

Polymeric Stone Dust is a unique mixture of polymer binders and calibrated stone. Once Gator Dust Bond sets, it becomes very firm and locks between the wetcast or natural stone joints, while still retaining flexibility and providing a long lasting, durable jointing material.

Can polymeric sand be used with flagstone?

Polymeric sand, or “poly-sand” seemed great at first. As easy to install as regular sand, almost. You simply sweep the material into the flagstone (or other paver) joints, lightly hose down, then it solidifies. Once it dries and hardens, the sand stays in place.

Can you put cement between flagstones?

What to put between flagstones? – YouTube

How do I keep weeds out of my flagstone patio?

Preventing Patio Weeds Between Paving Stones – YouTube

Is polymeric sand worth the money?

The combined benefits of durability, lasting strength, and pest deterrent makes it clear that it is worth it to go with the option of buying and implementing polymeric sand instead of sand from your backyard sandbox.

What is the difference between silica sand and polymeric sand?

Polymeric sand is a fine sand that is combined with additives that form a binding agent when exposed to water. Silica is such as an additive and is often used to help lock the fine sand particles together.

Is polymeric sand better than regular sand?

Polymeric sand is the more reliable and durable option for filling in the paver gaps. It outperforms regular sand when a homeowner is looking to lock the paver joints properly and wants a steady and stable path. It also provides a better appearance with its cleaner look and availability in varied colors.

How do you use flagstone stone dust?

Stone dust for stone: Why and how to use it – YouTube

Can you lay flagstone on sand?

Flagstone is a unique paving surface that adds a natural look to any patio or walkway. It can be laid on a dry bed of sand and gravel or it can be mortared to an existing concrete slab.

Is polymeric sand permanent?

Polymeric sand relies on a chemical reaction to harden it into the joints between your paving stones. Once it hardens, it is permanent.

Do flagstones get hot?

Flagstone Pavers

Deck surfaces consisting of flagstone, bluestone or other natural stone materials also get hot on hot days, and their surface temperatures in full sun are comparable to those of concrete pavers. At an air temperature of 90 degrees, a flagstone paver will have a surface temperature of about 112 degrees.

How much does a pallet of flagstone cost?

Flagstone pallet prices range from $600 to $2,200, or $0.20 to $0.55 per pound. Pallets weigh around three to four tons. One covers 210 to 560 square feet, depending on the dimensions of the stone.

Is flagstone the same as slate?

Slate is a a type of rock often referred to as flagstone. … Slate is popularly used for flagstone because it is very easily split into thin layers and is extremely common and reasonably priced. Slate is actually the metamorphosed form of the sedimentary rock shale.

How can I use polymeric sand without a compactor?

How to Compact Pavers without a Plate Compactor

  1. Step 1: protective clothing. Ad. …
  2. Step 2: prepare the substrate. Check the underground in the pit carefully. …
  3. Step 3: create a layer of frost protection. …
  4. Step 4: Build the base course. …
  5. Step 5: Apply a layer of sand. …
  6. Step 6: clean the vibrating plate.

How far does a bag of polymeric sand go?

When filling small gaps, a 50lb bag of polymeric sand will usually cover 75-100 ft2. When filling wide gaps of 1/4″ to 3/8″ a 50lb bag will usually cover 30-60 ft2.

Does polymeric sand need to be sealed?

how long after installing polymeric sand can pavers be sealed? Traditionally, concrete paver manufacturers have recommended waiting at least 90 days after polymeric sand installation to apply a protective sealant to a paver surface.

What is EnviroSAND made of?

EnviroSAND is a stabilized joint sand for interlocking paving stones, cobblestone, or brick. The product is made from a combination of traditional joint sand and organic glue that forms an adhesive gel whenever it comes in contact with water.

Is EnviroSAND available in US?

It also improved the strength of the product and added a level of natural weed deterrence. In 2004, Envirobond filed for its first patent. Envirobond now manufactures and sells EnviroSAND and EnviroSTONE in Canada, USA and over seven countries in Europe.

Is polymeric sand eco friendly?

Envirobond Vs. Polymeric Sand – YouTube

How do you harden sand between pavers?

As we brought up earlier, regular sand doesn’t harden enough on its own. So, if you need it to set, the best way to do it is by sealing them. You should give it at least 48 hours after applying the sealer. Foot traffic is ok after 3-4 hours.

Can you seal over polymeric sand?

If us- ing polymeric sand, you can install it after the sealer application has properly cured for 24 – 48 hours. If polymeric sand is installed prior to sealing, be sure surface is dry for 24 hours before applying sealer.

What is the best sand to use for paver joints?

Polymeric sand is a type of sand that’s often recommended for paver joints. Coated with a water-activated polymer, polymeric sand bonds together when exposed to moisture, keeping the sand from washing away or blowing out of the joints.

Can grass grow in polymeric sand?

When properly installed polymeric sand is very weed resistant. … When you allow organic material like grass clippings, dirt, mulch etc… to sit in the joints that will break down into an ideal place for a weed seed to get caught p and start growing.

Can polymeric sand ruin pavers?

Improperly installed poly sand can ruin a great paver project. If you want your patio finished for tomorrow’s family picnic, you should rethink your timeline. Because it takes time for sand to set, you’d be better off rescheduling the installation. It’ll be worth the wait to avoid the risk of a potential disaster.

Does polymeric sand stabilize?

Problems with Polymeric Sand

When these are mixed with water they form a binding agent that locks the sand particles together. … Polymeric sand also does not fill joints as deeply as silica sand. To remove the risk of staining your new pavers and stabilize them we prefer to use joint stabilizing paver sealer.