[FAQ]: What joint staff planning document describes the chairman’s vision?

a. Capstone Concept for Joint Operations (CCJO). The CCJO describes the Chairman’s vision for how the joint force will defend the nation against a wide range of security challenges. The CCJO articulates joint force support of defense strategic guidance for the protection of national interests.

What is the purpose of Dotmlpf-P?

Purpose of DOTMLPF-P Analysis

DOTMLPF-P is a tool that allows senior leaders the ability to analyze their organizational capabilities from the perspective of “Doctrine, Organization, Training, Materiel, Leadership, Personnel, Facilities, and Policy” when making future strategic decisions.

What is a Planord?

A planning directive that provides essential planning guidance and directs the initiation of execution planning before the directing authority approves a military course of action. Also called PLANORD.

How does contingency planning relate to campaign planning?

Campaigns seek to set conditions within the operational environment to achieve nationally directed objectives. They are tied to contingency plans in that the campaign serves to prevent, prepare for, or mitigate the impact of a crisis that could require implementation of a contingency plan.

Which organization is responsible for meeting the requirement if the gap requires a change in doctrine training or leader development?

If the capability requires a change in doctrine, training, or leader development, TRADOC begins action to meet the requirement upon validation by the HQDA Deputy Chief of Staff (DCS), G-3/5/7 and approval by the Chief of Staff, Army (CSA).

How does DOTMLPF work?

DOTMLPF-P is an acronym for a model that supports senior leaders ability to see their organizations from a strategic standpoint—Doctrine, Organization, Training, Materiel, Leadership, Personnel, Facilities, and Policy. This model supports effectively operationalizing the strategy.

Who is responsible for oversight of the Joint Capability Integration Development System Jcids process?

The JCIDS process involves identifying, documenting, and prioritizing capability gaps and the weapon system capabilities to address those gaps, generally known as capability requirements. 2 The Joint Requirements Oversight Council (JROC) manages the JCIDS process in support of the Chairman of the Joint Chiefs of Staff.

What is joint planning process?

Joint Planning Process (JPP) is a proven analytical process, which provides a methodical approach to planning at any organizational level and at any point before and during joint planning.

What are three presidential guidance documents that provide direction to the Department of Defense?

Three presidential guidance documents provide direction to the DoD. These are National Security Strategy, Unified Command plan, and the Contingency Planning Guidance.

What are the 5 COA screening criteria?

There are five fundamental issues that must be considered when developing COAs. A valid COA should be suitable, feasible, acceptable, distinguishable and complete [1]. A COA is suitable if it is in alignment with commander’s intent and will accomplish the mission when carried out successfully.

What is the joint strategic campaign plan?

The JSPS is the method by which the Chairman fulfills statutory responsibilities under Title 10, U.S. Code, maintains a global perspective, leverages strategic opportunities, translates strategy into outcomes, and develops military advice for the Secretary of Defense (SecDef) and the President.

Why is joint operations important?

Joint operations enable all services to come together, combine resources and reach a common goal of preserving the world’s premier democracy and protecting our forefathers’ vision of freedom and liberty for all.

What is contingency planning and examples?

A contingency plan is a plan devised for an outcome other than in the usual (expected) plan. … Contingency plans are often devised by governments or businesses. For example, suppose many employees of a company are traveling together on an aircraft which crashes, killing all aboard.

What is a joint DCR?

A Joint DCR is a Joint Capabilities Integration and Development System (JCIDS) produced document that intends to partially or wholly address an identified capability requirement and associated capability gap with a non-material solution, recommending changes to existing capabilities of the Joint force in one or more of …

What represents the continuous cycle of developing employing and maintaining Army organizations and systems?


The Army Organizational Life-Cycle Model graphically captures the continuous cycle of building, using, maintaining, and eliminating organizations.

What is the determine authorizations module important?

TAA develops the total requirements for peacetime, wartime, rotational force and DOD tasks, and subsequently the authorizations defining the force structure that the Army must build, raise, provision, sustain, maintain, train, and resource to meet OSD or Army guidance, combatant commanders’ requirements, and force …

What are JCIDS documents?

Joint Capabilities Integration and Development System (JCIDS) Documentation. The JCIDS process provides the baseline requirements for documentation, review, and validation of capability requirements, at all classification levels, across the Department.

What is the capability development document?

The Capability Development Document (CDD) specifies the operational requirements for the system that will deliver the capability that meets operational performance criteria specified in the Initial Capabilities Document (ICD).

Who submits JCIDS documents?

JCIDS Process

Documents for both processes are submitted to the Gatekeeper to initiate staffing and ensure appropriate visibility and participation across processes.

What are the three joint strategic planning system components?

JSPS Components. The three major components of the JSPS that address the Chairman’s statutory responsibilities are Chairman’s Assessments, Chairman’s Advice, and Chairman’s Direction.

What are the 7 joint functions?

In U.S. doctrine there are today seven joint functions: intelligence, movement and maneuver, fires, information, protec- tion, sustainment, and C2. For the rest of the NATO community, there are eight, since NATO doctrine also includes civil- military cooperation (CIMIC).

What are the four phases of the operations process?

The operations process consists of the major mission command activities: planning, preparing, executing, and assessing.

What is the Joint military Net Assessment?

The NMS is the Chairman’s central strategy and planning document. It translates policy guidance into Joint Force action and assists the Secretary of Defense “in providing for the strategic direction of the armed forces” by providing guidance regarding plans, force employment, posture, and future force development.

What is the document that currently provides guidance and instruction to the government of the United States of America?

The Code of Federal Regulations (CFR) annual edition is the codification of the general and permanent rules published in the Federal Register by the departments and agencies of the Federal Government.

What is a guidance document?

A guidance document is an agency statement of general applicability and future effect, other than a regulatory action, that sets forth a policy on a statutory, regulatory, or technical issue, or an interpretation of a statute or regulation.

What makes a good COA?

An acceptable COA must have the right balance among cost, risk, and the potential advantaged gained. Suitability. A suitable COA can be executed within the commander’s intent and planning guidance.

What does COA stand for in military?

CoA – course of action.

What is the purpose of analysis and wargaming?

COA analysis (wargaming) is the fourth step in the MDMP and is arguably one of the most critical because it takes the commander’s plan from concept to detail and synchronizes the unit’s combat power for an operation.

What is the Chairman’s risk assessment?

The Chairman’s Risk Assessment (CRA)

The Chairman’s Risk Assessment is informed by the full scope of the Joint Strategy Review process, and provides to Congress the Chairman’s assessment of the nature and magnitude of strategic and military risk in executing the missions called for in the National Military Strategy.

What is signed by the Chairman of the Joint Chiefs of Staff?

The NMS, signed by the Chairman of the Joint Chiefs of Staff, supports the aims of the National Security Strategy (NSS) and implements the National Defense Strategy (NDS).

What information do the GEF and JSCP contain?

The SecDef’s GEF and the Chairman’s JSCP are companion documents: The GEF provides strategic guidance while the JSCP provides implementing guidance. The GEF requires the geographic combatant commanders (GCC) to produce Theater Campaign Plans.

What is a joint operation?

A joint operation is a joint arrangement whereby the parties that have joint control of the arrangement have rights to the assets, and obligations for the liabilities, relating to the arrangement. A joint operator is a party to a joint operation that has joint control of that joint operation.

How do joint operations work?

The Armed Forces of the United States conduct military operations as a joint force. “Joint” connotes activities, operations, and organizations in which elements of two or more military departments participate. … The synergy that results from the operations of joint forces maximizes the capability of the force.

Which statement best describes what the joint force commander has the operational authority and responsibility to do?

Which statement best describes what the joint force commander has the operational authority and responsibility to do? Tailor forces for the mission at hand, selecting those that most effectively and efficiently ensure success.

What is the purpose of the contingency plan?

“The purpose of any contingency plan is to allow an organization to return to its daily operations as quickly as possible after an unforeseen event. The contingency plan protects resources, minimizes customer inconvenience and identifies key staff, assigning specific responsibilities in the context of the recovery.”

How contingencies can be incorporated into work plans?

Contingency planning is about being prepared for these incidents and having a policy in place to keep you and your employees safe. All plans should include both risk management, as well as business continuity management elements in order to allow a business to deal with interruptions and execution of duties.

What are some contingencies?

Let’s work through the five most common buying contingencies and how buyers can ensure their offer rises to the top.

  • Home Inspection Contingency. In the NAR survey, home inspection was the most common contingency, at 58 percent. …
  • Appraisal Contingency. …
  • Mortgage/Financing Contingency. …
  • Home Sale Contingency. …
  • Title Contingency.

Which document provides information on the development of requirements documents?

The JCIDS Manual provides information regarding the following activities:

  • identification of capability requirements and capability gaps.
  • development of requirements documents.
  • gate-keeping and staffing procedures.
  • post-validation development and implementation of material and non-material capability solutions.

What is initial capabilities document?

The ICD quantifies needed capability requirements and gaps associated with operational risks across the joint force. It also proposes materiel and/or non-materiel approaches to closing or mitigating some or all of those identified capability gaps.

Which of the following is a role of the Jcids document sponsor?

The Sponsors responsibilities are to make affordability determinations, develop JCIDS documentation, develop a Capability Development Document (CDD), Capability Production Document (CPD), or joint DCR, resolve issues that arise during the staffing, certification, and validation processes, and coordinate with sponsors, …

What process does the Army use to develop organizational designs?

The Force Design Update is the primary method used by the Army to create new organizational designs and to change existing designs.

What are MAP personnel?

Currently, PROFIS is transitioning to what is called Modified Table of Organization and Equipment (MTOE) Assigned Personnel, or MAP. … Now with the MAP system, these individuals become an organic part of a deployable unit while maintaining their place of duty at a MEDCOM facility.

Is the Army lead Organization to synchronize force integration efforts?

The Army Force Integration Division within the Headquarters Department of the Army G-3/5/7 Force Management Directorate is the lead for this process. The authoritative document that governs the process is Army Regulation 71-32.

Which Army organization is responsible for authorizations?

Document organizational authorizations. After approval of the resourced force structure by the Army leadership, USAFMSA manages the process of documenting the decision(s).

What is the DOD acquisition process?

The Acquisition Process is the management process of a defense program. It’s an event based process where a defense program goes thru a series of processes, milestones and reviews from beginning to end. Each milestone is the culmination of a phase were it’s determined if a program will proceed into the next phase.