How to cook a burger in a cast iron skillet?

Can you cook hamburger meat in a cast-iron skillet?

In a large skillet, preferably cast iron, heat the olive oil over medium heat for about 2 minutes until hot. Add the ground beef and, using a spatula, press the beef into an even, flat layer in the pan, almost like you’re making a big hamburger. Let it cook untouched for 5 minutes. … Remove from heat and use as desired.

How long should I cook a burger on a cast-iron skillet?

Heat a cast iron skillet or griddle over medium-high heat for 2 to 3 minutes. Place the hamburger patties in the pan. For medium-rare burgers, cook the patties for 4 minutes on each side. For medium burgers, cook the patties for 5 minutes on each side.

What temperature do you cook burgers on a cast-iron skillet?

How hot should cast iron be for burgers? Your cast iron skillet should be pretty hot when cooking cast iron smashburgers—preheat your skillet on medium-high to desired temperature of 400°F to 500°F.

How do you keep burgers from sticking to cast-iron?

Use the “drop, pop and smush” method: Take a flattened meatball, salt it aggressively on both sides, drop it and almost as soon as you drop it, flip it and press it down. That initial drop cauterizes the meat, which keeps it from sticking.

Do you put oil in a cast-iron skillet when cooking burgers?

We prefer to use a cast-iron skillet, but any nonstick skillet will work. … You do need oil to cook your skillet burger. Some preferred to use butter to cook a skillet burger, however we choose olive oil. Cook your burgers on medium high heat and do not flip until about 5 minutes of cooking on the first side.

How do you cook hamburgers on the stove without making a mess?

Cook over medium/ medium high heat. Don’t mess with the burgers while they are cooking. I like to use a screen to keep my stove from being covered in grease!

What temperature do you cook hamburgers at?

How hot should the grill be for burgers? For burgers the optimal grilling temperature rule is – the hotter the better. Heat your grill to medium high heat (between 350-400°F).

How do you pan fry burgers without burning them?

Use a clean onion slice each time you flip the meat over, then it’ll never burn and the meat will be well done. Combine @Onepotmeals answer (letting the temp of the meat rise before cooking) and @JacobG (lower cooking temp) and you have the canonical answer.

How do you clean a cast iron skillet after use?

Clean cast-iron skillet after every use

Wipe interior surface of still-warm skillet with paper towels to remove any excess food and oil. Rinse under hot running water, scrubbing with nonmetal brush or nonabrasive scrub pad to remove any traces of food. (Use small amount of soap if you like, rinse well.)

How do you know when burger is done?

The best way to tell if a burger is done is by using a thermometer. This is going to give you the most accurate assurance that your burger is cooked. You want the internal temperature to read no less than 155°F. Let the burgers rest for about 10 minutes and the internal temperature will rise to the 160°F mark.

How long does it take to cook burgers in frying pan?

Cook times for cooking burgers in a skillet (that are about 1 inch thick and cooked on medium high heat) are as follows:

  1. Medium Rare (red in the middle): 6 minutes total (3 minutes on each side)
  2. Medium (pink in the middle): 7-8 minutes total.
  3. Medium Well (smidge of pink in the middle): 9 minutes total.

How do I season a cast iron skillet?

How To Season Your Cast-Iron Skillet:

  1. Scrub skillet well in hot soapy water.
  2. Dry thoroughly.
  3. Spread a thin layer of melted shortening or vegetable oil over the skillet.
  4. Place it upside down on a middle oven rack at 375°. (Place foil on a lower rack to catch drips.)
  5. Bake 1 hour, let cool in the oven.

Why does food stick to my cast iron?

The Cause: Occasionally food may stick to your cast iron cookware. This can happen for a variety of reasons, such as not using enough fat or oil when cooking, using cookware that isn’t well seasoned, or when breaking in new cookware that hasn’t built up additional layers of seasoning.

Why do eggs stick to my cast iron skillet?

Mighty Nest lists the three most common reasons why your eggs may be getting stuck: Your cast iron skillet isn’t seasoned enough, there’s not enough fat, or you have the pan over the wrong heat temperature. During the preheat stage, the pan should be over medium-high heat.

Is it better to cook a hamburger fast or slow?

Burgers are best cooked over medium heat. A gas grill will fire up relatively quickly.

Is it better to cook burgers in butter or oil?

Is it better to cook burgers with oil or butter? Cook burgers with an oil or fat with a high smoke point, such as avocado oil or rice bran oil. Avoid butter since it has the tendency to burn. You only need enough oil to be able to grease your pan.

How long should I cook each side of a burger?

For a medium-rare burger, cook for 2 minutes and thirty seconds per side for 5 minutes total. For a medium burger, cook for 3 to 3 1/2 minutes per side for 6 to 7 minutes total. For a well-done burger, cook for 4 to 4 1/2 minutes per side for 8 to 9 minutes total.

Do you put butter on hamburgers?

Add your cooked burger to your toasted bun. And just plop an extra pat of butter on top to give the burger a bit of fatty sweetness. The butter can also sometimes help to cover up any “imperfections” in the cooking, or to take the burger to steak-like sublimity.

What is the best way to cook burgers indoors?

Here are 5 tips to help you get there!

  1. Use a 90/10 Beef Mix for Burgers on the Stove.
  2. Use a Griddle or Cast Iron Skillet.
  3. Weigh the Burgers but Don’t Shape Them, Then Press Flat While Cooking.
  4. Wipe Down the Skillet Between Burgers.
  5. Melt the Cheese Under a Metal Bowl.

Should you cover burgers on stove?

Cover the pan with a lid to let the cheese melt while you prepare the buns. Editor Tip: American, cheddar, pepper jack and Swiss melt beautifully on burgers.

What should I season my burgers with?

The Best Burger Seasoning is Kosher Salt

As with all meats, coarse salt, or kosher salt, is the best bet for seasoning ground beef. The large granules allow for the most control and deliver on the promise of enhancing the flavor of the final burger. Plan for about 3/4 teaspoon coarse salt per pound of ground beef.

How long should burgers be?

For rare burgers, cook for 4 minutes total (125°F) For medium-rare burgers, cook for 5 minutes total (135°F) For medium burgers, cook for 6 to 7 minutes total (145°F) For well-done burgers, cook for 8 to 9 minutes total (160 °F)

How do you tell if a burger is done with a thermometer?

To see if your burger is ready, just plunge the thermometer into the center of the burger. We suggest putting the thermometer into the side of the burger—that way it’s less likely to go all the way through the meat, and give you a false reading. At 120°F, the burger is rare. At 130°F, it’s medium-rare.

Is it better to cook burgers in the oven or on the stove?

So, is it better to fry or bake burgers? Both methods of cooking burgers are good, but if you want fast and seared, you should cook using a pan on a hot stove. If you want minimal work and a juicy marinade, burgers cooked in the oven will give you a better result.

Why are my burgers always pink in the middle?

Consumers view ground beef patties that are pink in the middle as being undercooked and unsafe when, in reality, these patties may be fully cooked and safe to eat. Persistent pinkness can be caused by reducing agents, pH, nitrite contamination, and/or carbon monoxide from gas ovens.

Why is my burger raw in the middle?

“When a rare steak is seared these bacteria are killed, but burger meat is minced so bacteria from the surface of the raw meat gets mixed all the way through the burger. “These bacteria can remain alive on the inside, unless the burger is fully cooked through, no matter how good quality and expensive the meat.”

Do you have to clean cast iron after every use?

So, how often should you clean a cast iron pan? Clean your cast iron pan after every use. Most of the time, wiping it down with a paper towel will do the trick. However, if your skillet is still dirty, wash it briefly by hand in soapy water before patting it dry for storage.

What is the best oil to season cast iron?

All cooking oils and fats can be used for seasoning cast iron, but based on availability, affordability, effectiveness, and having a high smoke point, Lodge recommends vegetable oil, melted shortening, or canola oil, like our Seasoning Spray.

Do you have to season a cast iron skillet after every use?

After the skillet is clean, it’s important to do a quick re-oiling and heating before storing to get the skillet ready for its next use. … But if you start to notice food constantly sticking, it’s time to season your skillet again. Or, if you notice a bit of rust, it’s definitely time to season.

How do you know when to flip a burger?

You’ll know to flip the patties when you see liquid pooling on the uncooked surface. Be careful not to char the meat or press down on the patties with a spatula while cooking, you’ll squeeze out all those flavorful juices.

How do you keep burgers from puffing up?

Make a thumbprint in the middle of the patty

Using a thumb, make a deep depression in the center of each patty to keep the burger from puffing up and bulging in the center. Otherwise, “It plumps up like a football and people smash it down. That’s the last thing you want to do,” Flay said.

Why are my burgers bleeding?

If blood is coming out when you cook them, it’s a sign they are fresh. Be easy with the spatula. You may be pressing them too hard, bringing out blood and also squeezing out the juices. Ideally, you’ll cook on one side and turn only once.

What is the secret to juicy hamburgers?

Prep Tips for How To Make Juicy Burgers

  1. Don’t overwork the meat. …
  2. Use cold hands. …
  3. Be gentle. …
  4. Make a thumb print. …
  5. Turn up the heat. …
  6. Don’t move the burgers around. …
  7. Don’t push down on the burgers. …
  8. Let the juicy burgers rest.

How do you cook a burger well done in a pan?

Heat oil in 12-inch nonstick skillet over medium heat until just beginning to smoke. Add meat patties, indentation side up, and cook until well-browned, about 5 minutes. Using wide spatula, flip burgers and continue cooking, about 4 minutes for medium-well or 5 minutes for well-done.

How do you cook hamburger meat in a pan?

Instructions

  1. Heat the pan and coat with oil. Heat the oil in a large skillet over medium-high heat. …
  2. Add the meat to the hot pan and break into large pieces. Add the meat to the center of the hot pan. …
  3. Break meat into smaller pieces, season, and brown. …
  4. Finish browning.

How can you tell if cast iron is seasoned?

A well-seasoned skillet will have a dark, semiglossy finish and won’t be sticky or greasy to the touch. It won’t have any rust or any dull or dry patches. An easy way to test a skillet’s seasoning is to fry an egg (heat 1 tablespoon vegetable oil in skillet over medium heat for 3 minutes, then add egg).

When should I Reseason cast iron?

In my experience, it’s reasonable to reseason a cast iron skillet once to 2-3 times per year. If you cook fattier foods in your skillet and avoid cleaning it with soapy water, the seasoning could last for years.

Can I use olive oil to season a cast iron pan?

Do not use olive oil or butter to season your cast-iron pan — they’re great to cook with, just not for initial seasoning. Place the pan upside down on the top rack of the oven and bake for 1 hour. … For a seasoning bonus, cook bacon, thick pork chops or a steak in the pan for its first go-round.

What should you not cook in cast iron?

4 Things You Should Never Cook in Cast Iron:

  1. Smelly foods. Garlic, peppers, some fish, stinky cheeses and more tend to leave aromatic memories with your pan that will turn up in the next couple of things you cook in it. …
  2. Eggs and other sticky things (for a while) …
  3. Delicate fish. …
  4. Acidic things—maybe.

Can you use PAM on cast iron?

Do not try to use nonstick sprays like Pam to season your cast iron skillet, as they contain other ingredients that aren’t good for your pan. … No more trying to pour oil into the pan and pouring too much. And goodbye to excess oil that gets sticky if stored too long on the pan.

What do you cook first in a cast iron?

The First 5 Things to Cook in Your Cast Iron Pan

  1. First fry a few eggs. …
  2. Then sear some pork chops &amp, make a pan sauce. …
  3. Next, fry up some crispy, tasty schnitzel. …
  4. Follow up with an easy-fancy frittata. …
  5. And then make Buffalo chicken dip for the win.

Can I use butter in a cast iron skillet?

Yes, you can cook with butter in your cast iron skillet or Dutch oven. Keep in mind that butter burns at temperatures above 350°F (177°C), so you shouldn’t use high heat when you’re frying foods with it. Either turn down the heat or substitute it with an oil that has a higher smoke point.

Can you season cast iron too much?

#3Seasoning Can Be an All-Day Job

The process of seasoning cast iron cookware consists of coating it with oil, heating it in the oven, letting it cool, and repeating. … Seasoning a pan with too much oil will cause it to be sticky, and then you’ll just have to start over.

Do you spray a cast iron skillet before cooking?

Oil your food: whereas with other pans, like stainless steel or non-stick, you’ll squirt a little oil into the base of the pan before you cook, with cast iron (especially griddled cast iron), you’re much better off brushing oil onto your meat or veggies before you cook them.

Why do my burgers ball up?

Kenji over at Serious Eats says that this is because grilling or broiling burgers, where heat hits the edges of the burger, cooks and therefore contracts the meat on the outside more quickly than the middle, resulting in the center puffing. The indent counteracts this effect from those cooking methods.

Should you let burgers rest?

We advocate a rest for most meat, but it’s particularly important for burgers. … For perfect burgers (and buns), let the burgers rest for 5 minutes, tented with foil and preferably on a rack so moisture doesn’t collect underneath, before transferring them to buns.

Why are my burgers dry?

Using meat that’s too lean.

Using meat that’s too lean results in burgers that are lacking in both flavor and texture, and easily end up dry and crumbly. … The fat is important for adding flavor and holding the patty together. The ideal ground beef for burgers is 80% lean and 20% fat.