How to bake a whole ham?

How long does it take to cook a full ham?

Preheat the oven to 325°F. To heat the ham, place it on a rack in a shallow roasting pan, and bake uncovered. For a whole ham, allow 15 to 18 minutes to the pound, for a half, 18 to 24 minutes per pound. The ham will be ready when the internal temperature reaches 140°F.

How long does it take to cook a whole bone-in ham?

Put the ham, flat-side down, on a rack in a roasting pan. Pour 1/4 inch water into the bottom of the pan. Transfer to the oven and roast until a thermometer inserted into the thickest part of the ham registers 130 degrees F, about 2 hours, 30 minutes (about 15 minutes per pound).

Should I bake ham covered or uncovered?

Ham is best reheated low and slow, and heating it uncovered means that the moisture in the ham evaporates, leaving it dry and unappetizing. … Cover the ham with foil or use a baking bag to heat up the ham until it’s time to glaze.

Do you cook a ham at 325 or 350?

A raw, or fresh, ham needs to be fully cooked. … Cover with foil and cook in a 350 F oven for approximately 20 minutes per pound, or until the internal temperature is 160 F. Baste throughout cooking.

How long do I cook a 10 lb precooked ham?

Preheat oven to 325 F. Wrap ham in foil and place, cut side down, in a pan with a roasting rack. Place pan in oven and cook (allow about 10 to 14 minutes per pound of meat.). When digital meat thermometer, inserted in thickest part of ham, registers 100 to 110 F, remove ham from oven and unwrap.

How long should I cook a 9 lb ham?

For this recipe a bone-in fully cooked ham cooks for about 12-14 minutes per pound (a 9lb ham will take about 2 1/4 hours). It is easy to overcook ham so to really make a perfect baked ham, I suggest using a thermometer like this one.

How long do you bake a ham at 350?

Preheat the oven to 350 degrees F. Unwrap the ham and rinse it under cold water. Place it on the rack in the roasting pan. Cover with foil and bake 1 hour 40 minutes.

How long do I cook a 12 lb ham?

A 12-pound ham will take about 18 to 20 minutes per pound to bake, or roughly three and one-half to four hours. At the lowest time estimate, begin checking the internal temperature. When it reaches 160 degrees F, the ham is done. Tips &amp, Warnings: –Let the cooked ham rest for about 15 minutes before carving.

Do you cook a ham bone up or down?

After trimming the skin and some of the fat, place the ham on a rack in a shallow baking pan with fat side up. Half hams should be placed with cut side down. Add 1/4 inch of water to the bottom of the roasting pan.

How do you keep ham from drying out in the oven?

Gently cook the ham with at least 1/2 cup of water, wine, or stock in the pan and cover it with foil to make sure the ham won’t dry out (until you’ve applied the glaze—then, the foil comes off). Give your ham some homemade love!

Do you add water to bake a ham?

Pour enough water into the bottom of the roasting pan to come to a 1 inch depth. Cover the pan tightly with aluminum foil or a lid. Bake for 4 1/2 to 5 hours in the preheated oven (about 22 minutes per pound), or until the internal temperature of the ham has reached 160 degrees F (72 degrees C).

Do you wrap ham in foil to bake?

Baking your ham is the hands-down best way to prepare it. Wrap your ham in aluminum foil, and place it in an oven bag cut side down inside a roasting pan. This method helps prevent you from inadvertently drying out your ham and is worth the effort.

How long do I cook a 10 pound ham at 350 degrees?

How Long to Bake Ham. It will normally take about 10-15 minutes per pound to heat the spiral sliced ham to 140 degrees Fahrenheit. We set our oven to 350 degrees and plan for it to take about 1 ½ to 2 hours for the nearly 10 pound hams we buy.

How long do you cook a 12 lb ham at 350 degrees?

How Long to Bake Ham. It will normally take about 10-15 minutes per pound to heat the spiral sliced ham to 140 degrees Fahrenheit. We set our oven to 350 degrees and plan for it to take about 1 ½ to 2 hours for the nearly 10 pound hams we buy.

Can I cook a precooked ham at 350?

Move the oven rack to the lowest position and preheat the oven to 350˚F. Bake the ham in the preheated oven, uncovered, for 2 1/2 to 3 hours or until a meat thermometer inserted into the thickest portion registers 140°, basting every 30 minutes with 1/2 cup of the glaze.

How do you heat up a precooked ham without drying it out?

The goal is to reheat the ham without drying it out. The best way to do this is to place the ham on a rack in a roasting pan. Add water to the bottom of the pan and cover the whole thing tightly with foil. Bake at 325F for 16-20 minutes per pound, until a meat thermometer registers 135F.

What temperature do you cook a 10 pound ham?

Pre-Cooked and Bone-In Ham

Cooking Temperature and Time: If the ham is a half ham weighing between 5 to 7 pounds, it should be heated at 325°F for 18-24 minutes per pound. If it is a whole ham weighing between 10 to 14 pounds, heat the ham at 325°F for 15-18 minutes per pound.

Can you eat a precooked ham cold?

Cooked canned ham and cooked vacuum-packaged ham, both from federally inspected plants, can be eaten right out of the package. All of these along with spiral-cut cooked ham are safe to eat cold or can be warmed to an internal temperature of 145°F, as they are already fully cooked.

How many will a 5 lb ham feed?

How Much Boneless Ham do you Need?

Number of People Amount of Boneless Ham
6 – 8 3 – 4 lbs
8 – 10 4 – 5 lbs
10 – 12 5 – 6 lbs
15 – 20 8 – 10 lbs

How do you cook a cured ham from the butcher?

Place the ham cut side down in the pan, The general rule of thumb for heating smoked ham is 10-15 minutes per pound in a 350 degree F oven until it reaches an internal temperature of 135-140 degrees. (A meat thermometer is a helpful tool if you don’t have one already!)

What temperature should ham be cooked?

Fresh Ham, Uncooked

Cook at 325 degrees F to an internal temperature of 145 degrees F. 12 to 16 lbs.

Does cured ham need to be cooked?

The answer, in short, is if it is cured, smoked or baked, ham is considered “pre-cooked,” and would not technically need to be cooked. This includes the ham that is purchased at the deli. In fact, most ham that is sold to consumers is already cured, smoked or baked.

How do you cook a 12 pound precooked ham?

Preheat the oven to 350 F. Place the ham on a rack in a large baking pan and add about 1/4- to 1/2-inch of water to the pan. If the ham is labeled “fully cooked” (does not require heating), heat it in the oven for about 10 minutes per pound, or to an internal temperature of 140 F.

What temperature do you cook a ham in a roaster?

Turn on your electric roaster to 275 degrees F. Set the thermometer to alert you when the ham reaches 140 degrees F. Once the oven reaches 275 degrees, the ham will take 15-20 minutes per pound to heat through. An eight-pound ham takes just over 2 hours to heat through.

Do you need a roasting rack for ham?

You can use a roasting pan without the rack, but the rack prevents a roast from touching the bottom of the pan, promoting even heating and allowing the pan drippings to fall through the rack.

Do you need a roasting pan for ham?

You’ll want a pan that’s large enough to fit the ham comfortably without touching the sides. A depth of 3 to 4 inches will help avoid spilling or splashing of hot cooking juices. Meat thermometer: An ovenproof or instant-read thermometer will help ensure your ham is hot all the way through.

What makes ham rubbery?

Water or natural juices are often added to hams to keep them moist and tender. … The lowest protein level represents a ham product in which any quantity of water may have been added, decreasing the protein level and the flavor of the ham and making it somewhat rubbery.

How do you tenderize a ham?

Try cooking ham at 250 degrees Fahrenheit for a large size or 300 F for a small one, and pour a 1/2 cup of boiling water into the bottom of your roaster to provide steam. Alternatively, slide your ham into the same type of roasting bag used for a turkey. This also keeps the ham moist as it bakes.

Do you need to baste a ham?

To keep the ham moist when baking,remove the skin from the ham and leave a layer of fat. The fat will add flavor and help keep the meat moist while the ham cooks. The ham can also have a glaze added at the end of the cooking time to add more flavor.

Do you rinse ham before cooking?

You don’t need to wash a ham before baking. If you ask us, baked ham is delicious even when you leave it plain, however, scoring a diamond pattern with a chef’s knife in the outer layer and brushing on a glaze during baking makes the ham a showy centerpiece and adds flavor.

Do you put glaze on ham before cooking?

WHEN SHOULD I ADD THE HAM GLAZE TO THE HAM? Most ham recipes should be glazed towards the end of cooking, so the sugar doesn’t have a chance to caramelize too much. When there’s about 20-30 minutes of total time left to your baked ham, pour the brown sugar glaze over the top and put back in the oven to bake uncovered.

When should I glaze my ham?

In most cases, you will want to glaze the ham during the last 15 to 20 minutes of baking. If you glaze it sooner, the sugar in the glaze could cause it to burn. You will need at least 1 cup of glaze for every 5 to 10 pounds of ham.

Can I cook my ham in foil?

Wrap ham in aluminum foil and place in a baking dish or pan. … Juices from the ham will seep out during cooking so make sure the foil forms a loose bowl around the base of the ham and the top of the foil is sealed to prevent moisture from escaping.

What temperature should a bone in ham be cooked to?

Reheat cooked hams packaged in USDA-inspected plants to a minimum internal temperature of 140 °F and all others to 165 °F. 10 to 14 lbs. 15 to 18 min/lb. Half, bone in 5 to 7 lbs.